Cub Cadet I-Beam Style - Manual (Page 240)

6-41
6 NOTE
Make certain that all staples are removed or
bent over before continuing.
20. Remove the plastic bag covering all the log
splitter components.
21. Remove both boxes and the tires from the
crate.
22. Cut and remove the banding straps securing
the remaining components to the crate using
tin snips.
23. Remove and inspect all components. See Fig-
ure 6-23.
24. Open the plastic bag containing all the owners
manuals, and read all information carefully
before continuing. See Figure 6-24.
Contents of Crate
1. Reservoir Tank and Engine/Pump Assembly
2. Wedge, Beam and Cylinder Assembly
3. Tongue Assembly
4. Wheels Assemblies
5. Hitch Assembly
6. Beam Support/Latch Bracket
7. Fenders (If Equipped)
8. 2 Hub Caps
9. Optional Fender Hardware
10. Log Splitter Operators Manual and Registra-
tion
11. Engine Owners Guide
Tongue Assembly
NOTE
The hardware that is used to assemble this
section will be found in place on the tongue
and hitch.
550 Log Splitter Set-up Procedures
Figure 6-24
Log Splitters 2.fm Page 41 Wednesday, February 20, 2002 1:35 PM