Winco DGC-2020 - Manual (Page 148)

Remote RTD Inputs
When an optional AEM-2020 (Analog Expansion Module) is connected, the status of the remote RTD
inputs, remote RTD input alarms, and remote RTD input pre-alarms are shown on this screen. The status
is TRUE when the corresponding LED is red. Refer to Figure 4-77. Remote RTD Input #1 is shown.
Figure 4-77. Metering, Inputs, Remote RTD Inputs
Remote Thermocouple Inputs
When an optional AEM-2020 (Analog Expansion Module) is connected, the status of the remote
thermocouple inputs, remote thermocouple input alarms, and remote thermocouple input pre-alarms are
shown on this screen. The status is TRUE when the corresponding LED is red. Refer to Figure 4-78.
Remote Thermocouple Input #1 is shown.
Figure 4-78. Metering, Inputs, Remote Thermocouple Inputs
Remote Analog Input Values
When an optional AEM-2020 (Analog Expansion Module) is connected, the values of the scaled analog
inputs, raw analog inputs, RTD input temperatures, raw RTD inputs, thermocouple input temperatures,
and raw thermocouple inputs are shown on this screen. Refer to Figure 4-78.
4-78 DGC-2020 BESTCOMSPlus Software 9400200990 Rev K