Winco DGC-2020 - Manual (Page 239)

BESTCOMSPlus SOFTWARE
BESTCOMSPlus provides the user with a point-and-click means to set and monitor the Contact
Expansion Module. Installation and operation of BESTCOMSPlus is described in Section 4,
BESTCOMSPlus Software.
INSTALLATION
Contact Expansion Modules are delivered in sturdy cartons to prevent shipping damage. Upon receipt of
a module, check the part number against the requisition and packing list for agreement. Inspect for
damage, and if there is evidence of such, immediately file a claim with the carrier and notify the Basler
Electric regional sales office, your sales representative, or a sales representative at Basler Electric,
Highland, Illinois USA.
If the device is not installed immediately, store it in the original shipping package in a moisture- and dust-
free environment.
Product Registration
Registering with Basler Electric enables you to receive important information updates on your product
plus new product announcements. Register your product by directing your web browser to
www.basler.com .
Mounting
Contact Expansion Modules are contained in an encapsulated plastic case and may be mounted in any
convenient position. The construction of a Contact Expansion Module is durable enough to mount directly
on a genset using UNF ¼-20 or equivalent hardware. Hardware selection should be based on any
expected shipping/transportation and operating conditions. The torque applied to the mounting hardware
should not exceed 65 in-lb (7.34 N•m).
See Figure 9-1 for CEM-2020 overall dimensions. All dimensions are shown in inches with millimeters in
parenthesis.
P 0056-98
Figure 9-1. CEM-2020 Overall Dimensions
9400200990 Rev K DGC-2020 CEM-2020 (Contact Expansion Module) 9-3