Introduction, Front panel, Section 2 – Winco DGC-2020 User Manual
Page 27: Human-machine interface -1, Introduction -1, Front panel -1, Figure 2-1. front panel hmi -1
Advertising
SECTION 2
HUMAN-MACHINE INTERFACE
INTRODUCTION
This section describes the components of the DGC-2020 human-machine interface (HMI). DGC-2020
HMI components are located on the front panel (controls and indicators) and the rear panel (terminals
and connectors).
FRONT PANEL
Figure 2-1 illustrates the front panel HMI of the DGC-2020. Table 2-1 lists the call-outs of Figure 2-1
along with a description of each HMI component.
Figure 2-1. Front Panel HMI
9400200990 Rev K
DGC-2020 Human-Machine Interface
2-1
Advertising