Winco DGC-2020 - Manual (Page 81)

Style Number
When a PC operating BESTCOMSPlus is communicating with a DGC-2020, the style number of the
DGC-2020 is automatically displayed on the BESTCOMSPlus Style Number tab.
When configuring DGC-2020 settings off-line, the style number for the unit to be configured can be
entered into BESTCOMSPlus to enable configuration of the required settings.
BESTCOMSPlus style number selections and definitions are illustrated in Figure 4-12.
Figure 4-12. DGC-2020 Style Chart Selections and Definitions
Device Info
Information about a DGC-2020, LSM-2020 (Load Share Module), and CEM-2020 (Contact Expansion
Module) can be obtained when communicating with BESTCOMSPlus.
DGC-2020
Information about a DGC-2020 communicating with BESTCOMSPlus can be obtained on the Device Info
tab of BESTCOMSPlus.
Select application version
A when configuring DGC-2020 settings off-line. When on-line, read-only
information includes the application version B , boot code version C , application build D , serial number E ,
application part number F , model number G , Language Module Version H , and Language Module Part
Number I .
Site-specific information for the DGC-2020 can be assigned by the user. This label includes a device
name
J .
Load Share Module
Information about an LSM-2020 communicating with BESTCOMSPlus can also be obtained on the
Device Info tab of BESTCOMSPlus.
When on-line, read-only information includes the application version
K , boot code version L , application
build M , serial number N , application part number O , and model number P . The Refresh button Q is used to
refresh the screen after connecting an optional LSM-2020.
Contact Expansion Module
Information about a CEM-2020 communicating with BESTCOMSPlus can also be obtained on the Device
Info tab of BESTCOMSPlus.
When on-line, read-only information includes the application version
R , boot code version S , application
build T , serial number U , application part number V , and model number W . The Refresh button X is used to
update the screen after connecting an optional CEM-2020.
BESTCOMSPlus device information values and settings are illustrated in Figure 4-13.
Analog Expansion Module
Information about an AEM-2020 communicating with BESTCOMSPlus can also be obtained on the
Device Info tab of BESTCOMSPlus.
9400200990 Rev K
DGC-2020 BESTCOMSPlus Software 4-11