Ip core architecture – Altera Arria V Avalon-ST User Manual

Page 134

Advertising
background image

IP Core Architecture

9

2014.12.15

Subscribe

Send Feedback

The Arria V Hard IP for PCI Express implements the complete PCI Express protocol stack as defined in

the PCI Express Base Specification. The protocol stack includes the following layers:
Transaction Layer—The Transaction Layer contains the Configuration Space, which manages

communication with the Application Layer, the RX and TX channels, the RX buffer, and flow control

credits.

Data Link Layer—The Data Link Layer, located between the Physical Layer and the Transaction Layer,

manages packet transmission and maintains data integrity at the link level. Specifically, the Data Link

Layer performs the following tasks:
• Manages transmission and reception of Data Link Layer Packets (DLLPs)

• Generates all transmission cyclical redundancy code (CRC) values and checks all CRCs during

reception

• Manages the retry buffer and retry mechanism according to received ACK/NAK Data Link Layer

packets

• Initializes the flow control mechanism for DLLPs and routes flow control credits to and from the

Transaction Layer

Physical Layer—The Physical Layer initializes the speed, lane numbering, and lane width of the PCI

Express link according to packets received from the link and directives received from higher layers.

©

2014 Altera Corporation. All rights reserved. ALTERA, ARRIA, CYCLONE, ENPIRION, MAX, MEGACORE, NIOS, QUARTUS and STRATIX words and logos are

trademarks of Altera Corporation and registered in the U.S. Patent and Trademark Office and in other countries. All other words and logos identified as

trademarks or service marks are the property of their respective holders as described at

www.altera.com/common/legal.html

. Altera warrants performance

of its semiconductor products to current specifications in accordance with Altera's standard warranty, but reserves the right to make changes to any

products and services at any time without notice. Altera assumes no responsibility or liability arising out of the application or use of any information,

product, or service described herein except as expressly agreed to in writing by Altera. Altera customers are advised to obtain the latest version of device

specifications before relying on any published information and before placing orders for products or services.

ISO

9001:2008

Registered

www.altera.com

101 Innovation Drive, San Jose, CA 95134

Advertising
This manual is related to the following products: