Update_node_loc, Usage, Options – Altera Quartus II Scripting User Manual
Page 213: Description, Example, Update_node_loc –83
Advertising
Chapter 3: Tcl Packages & Commands
3–83
chip_planner
© July 2013
Altera Corporation
Quartus II Scripting Reference Manual
update_node_loc
Usage
update_node_loc
Options
None
Description
This command uses the node_loc.loc file to update node locations using the ECO fitter. Any warnings are
stored in the text_eco_warnings.loc file. You must open a project and call read_netlist before using this
command. A node_loc.loc file must exist before running this command (see get_node_loc for instructions
on creating a .loc file).
Example
project_open my_proj
read_netlist
#ensure that the .loc file exists and is ready with desired node
# locations
update_node_loc
project_close
Advertising