Altera Quartus II Scripting - Manual (Page 452)

3–322 Chapter 3: Tcl Packages & Commands
sdc
Quartus II Scripting Reference Manual © July 2013 Altera Corporation
Example
# Simple output delay with the same value for min/max and rise/fall:
# 1) set on ports with names of the form myout*
set_output_delay -clock clk 0.5 [get_ports myout*]
# 2) set on all output ports
set_output_delay -clock clk 0.5 [all_outputs]
# Output delay with respect to the falling edge of clock
set_output_delay -clock clk -clock_fall 0.5 [get_ports myout*]
# Output delays for different min/max and rise/fall combinations
set_output_delay -clock clk -max -rise 0.5 [get_ports myout*]
set_output_delay -clock clk -max -fall 0.4 [get_ports myout*]
set_output_delay -clock clk -min -rise 0.4 [get_ports myout*]
set_output_delay -clock clk -min -fall 0.3 [get_ports myout*]
# Adding multiple output delays with respect to more than one clock
set_output_delay -clock clkA -min 0.2 [get_ports myout*]
set_output_delay -clock clkA -max 0.8 [get_ports myout*]
set_output_delay -clock clkA -clock_fall 0.6 [get_ports myout*] \
-add_delay
set_output_delay -clock clkB -min 1.1 [get_ports myout*] -add_delay
set_output_delay -clock clkB -max 1.5 [get_ports myout*] -add_delay
# Specifying an output delay relative to an external clock output port
set_output_delay -clock clk -reference_pin [get_ports clkout] 0.8 \
[get_ports myout*]