Altera Quartus II Scripting - Manual (Page 33)

Chapter 2: Command-line Executables 2–7
quartus_cdb
© July 2013 Altera Corporation Quartus II Scripting Reference Manual
Optional Content
As mentioned above, you can customize the content of the Tcl files with any of the following command
line directives. Each is explained in more detail in their own help sections.
--include_makefiles_with_bottom_up_scripts=<on|off>
Default is on.
--include_project_creation_in_bottom_up_scripts=<on|off>
Default is on.
--include_virtual_pins_in_bottom_up_scripts=<on|off>
Default is on.
--include_virtual_input_pin_timing_in_bottom_up_scripts=<on|off>
Default is on.
--include_virtual_output_pin_timing_in_bottom_up_scripts=<on|off>
Default is on.
--include_virtual_pin_locations_in_bottom_up_scripts=<on|off>
Default is on.
--include_logiclock_regions_in_bottom_up_scripts=<on|off>
Default is on.
--include_all_logiclock_regions_in_bottom_up_scripts=<on|off>
Default is on.
--include_global_signal_promotion_in_bottom_up_scripts=<on|off>
Default is off.
--include_pin_locations_in_bottom_up_scripts=<on|off>
Default is on.
--include_timing_assignments_in_bottom_up_scripts=<on|off>
Default is on.
--include_design_partitions_in_bottom_up_scripts=<on|off>
Default is on.
--remove_existing_regions_in_bottom_up_scripts=<on|off>
Default is on.
--disable_auto_global_promotion_in_bottom_up_scripts=<on|off>
Default is off.
--bottom_up_scripts_output_directory=<output_directory>
Default is current project directory.
--bottom_up_scripts_virtual_input_pin_delay=<delay_in_ns>
No default. Must provide if including virtual input pin timing.
--bottom_up_scripts_virtual_output_pin_delay=<delay_in_ns>
No default. Must provide if including virtual output pin timing.
--generate_hc_files
Generates HardCopy Handoff files to an output directory.
The output directory is "hc_output" under the current project directory unless the output directory is
specified by the HC_OUTPUT_DIR assignment in the Quartus II Settings File (.qsf).
--generate_hc_pll_delay
Returns the PLL annotated delay.
Ggenerates the PLL annotated delay for both commercial and industrial speed grades of HardCopy
devices. This option only returns the PLL annotated delay and does not update the collection.sdc file.