Hc[=on|off, Post_fit[=on|off, Post_syn[=on|off – Altera Quartus II Scripting User Manual
Page 52: Rtl[=on|off, Hc[=on|off] –26 --post_fit[=on|off] –26, Post_syn[=on|off] –26 --rtl[=on|off] –26, Hc[=on|off] –26, Post_fit[=on|off] –26 --post_syn[=on|off] –26, Rtl[=on|off] –26
Advertising
2–26
Chapter 2: Command-line Executables
quartus_drc
Quartus II Scripting Reference Manual
© July 2013
Altera Corporation
--hc[=on|off]
Option to generate HardCopy files.
This option overrides the settings specified in the Quartus II Settings File (.qsf).
--post_fit[=on|off]
Option to perform post-fit design analysis.
--post_syn[=on|off]
Option to perform post-synthesis design analysis.
--rtl[=on|off]
Option to run Design Assistant in pre-synthesis (RTL) mode.
Advertising