Altera Quartus II Scripting - Manual (Page 289)

Chapter 3: Tcl Packages & Commands 3–159
jtag
© July 2013 Altera Corporation Quartus II Scripting Reference Manual
open_device
Usage
open_device -device_name <device name> -hardware_name <hardware name>
Options
-device_name <device name>: The name of the device on the JTAG chain. The name can be
obtained from command: get_device_names
-hardware_name <hardware name>: The name of the programming hardware that connects to
the JTAG chain. The name can be obtained from command: get_hardware_names
Description
Initiate a shared JTAG communication with the device. The command, close_device, is called to end the
communication with the device.
Only one device can be opened per process. Multiple devices can be opened in multiple processes.
Example
# List all available programming hardwares, and select the USBBlaster.
# (Note: this example assumes only one USBBlaster connected.)
puts "Programming Hardwares:"
foreach hardware_name [get_hardware_names] {
puts $hardware_name
if { [string match "USB-Blaster*" $hardware_name] } {
set usbblaster_name $hardware_name
}
}
puts "\nSelect JTAG chain connected to $usbblaster_name.\n";
# List all devices on the chain, and select the first device on the
# chain.
puts "\nDevices on the JTAG chain:"
foreach device_name [get_device_names -hardware_name $usbblaster_name] {
puts $device_name
if { [string match "@1*" $device_name] } {
set test_device $device_name
}
}
puts "\nSelect device: $test_device.\n";
# Open device
open_device -hardware_name $usbblaster_name -device_name $test_device
# Retrieve device id code.
# IDCODE instruction value is 6; The ID code is 32 bits long.
# IR and DR shift should be locked together to ensure that other
# applications
# will not change the instruction register before the id code value is
# shifted
# out while the instruction register is still holding the IDCODE
# instruction.
device_lock -timeout 10000
device_ir_shift -ir_value 6 -no_captured_ir_value
puts "IDCODE: 0x[device_dr_shift -length 32 -value_in_hex]"
device_unlock
# Close device
close_device