Altera Quartus II Scripting - Manual (Page 83)

Chapter 2: Command-line Executables 2–57
quartus_pow
© July 2013 Altera Corporation Quartus II Scripting Reference Manual
Note: Regardless of the setting of this option, all unspecified toggle rates for input I/O pin signals use the
default toggle rate specified by either the command line option --default_input_io_toggle_rate or the value
stored in the Quartus II Settings File (.qsf).
The default static probability value used by the PowerPlay Power Analyzer is 0.5.
--vcd_filter_glitches[=on|off]
Option to use glitch filtering when reading VCD Files (.vcd) as input. This command line option can only
appear once. If this command line option is not used, the value stored in the Quartus II Settings File (.qsf)
is used to determine whether or not glitch filtering is used when reading VCD Files. This option has no
effect if the "input_vcd" option is not used.
--voltage=<value_in_mV>
Option to specify the device voltage (mV) when running the PowerPlay Power Analyzer.