Figure 52: enabling power savings – Microsens MS453490M Management Guide User Manual
Page 149
Advertising
C
HAPTER
5
| Interface Configuration
Saving Power
– 149 –
P
ARAMETERS
These parameters are displayed:
◆
Port – Power saving mode only applies to the Gigabit Ethernet ports
using copper media.
◆
Power Saving Status – Adjusts the power provided to ports based on
the length of the cable used to connect to other devices. Only sufficient
power is used to maintain connection requirements. (Default: Enabled
on Gigabit Ethernet RJ-45 ports)
W
EB
I
NTERFACE
To enable power savings:
1.
Click Interface, Green Ethernet.
2.
Mark the Enabled check box for a port.
3.
Click Apply.
Figure 52: Enabling Power Savings
Advertising