Microsens MS453490M Management Guide - Manual (Page 299)

C HAPTER 14 | Security Measures
Access Control Lists
– 299 –
W EB I NTERFACE
To configure a time range:
1. Click Security, ACL.
2. Select Configure Time Range from the Step list.
3. Select Add from the Action list.
4. Enter the name of a time range.
5. Click Apply.
Figure 167: Setting the Name of a Time Range
To show a list of time ranges:
1.
Click Security, ACL.
2.
Select Configure Time Range from the Step list.
3. Select Show from the Action list.
Figure 168: Showing a List of Time Ranges
To configure a rule for a time range:
1. Click Security, ACL.
2. Select Configure Time Range from the Step list.
3. Select Add Rule from the Action list.
4. Select the name of time range from the drop-down list.
5. Select a mode option of Absolute or Periodic.