Figure 128: attaching a policy map to a port – Microsens MS453490M Management Guide User Manual
Page 250
Advertising
C
HAPTER
12
| Quality of Service
Attaching a Policy Map to a Port
– 250 –
W
EB
I
NTERFACE
To bind a policy map to a port:
1.
Click Traffic, DiffServ.
2.
Select Configure Interface from the Step list.
3.
Check the box under the Ingress field to enable a policy map for a port.
4.
Select a policy map from the scroll-down box.
5.
Click Apply.
Figure 128: Attaching a Policy Map to a Port
Advertising