Figure 229: configuring trap managers (snmpv1), Figure 230: configuring trap managers (snmpv2c) – Microsens MS453490M Management Guide User Manual
Page 392
Advertising
C
HAPTER
15
| Basic Administration Protocols
Simple Network Management Protocol
– 392 –
W
EB
I
NTERFACE
To configure trap managers:
1.
Click Administration, SNMP.
2.
Select Configure Trap from the Step list.
3.
Select Add from the Action list.
4.
Fill in the required parameters based on the selected SNMP version.
5.
Click Apply
Figure 229: Configuring Trap Managers (SNMPv1)
Figure 230: Configuring Trap Managers (SNMPv2c)
Advertising