Microsens MS453490M Management Guide - Manual (Page 846)

C HAPTER 36 | Quality of Service Commands
– 846 –
show class-map This command displays the QoS class maps which define matching criteria
used for classifying traffic.
S YNTAX
show class-map [class-map-name]
class-map-name - Name of the class map. (Range: 1-32 characters)
D EFAULT S ETTING
Displays all class maps.
C OMMAND M ODE
Privileged Exec
E XAMPLE
Console#show class-map
Class Map match-any rd-class#1
Description:
Match ip dscp 10
Match access-list rd-access
Match ip dscp 0
Class Map match-any rd-class#2
Match ip precedence 5
Class Map match-any rd-class#3
Match vlan 1
Console#
show policy-map This command displays the QoS policy maps which define classification
criteria for incoming traffic, and may include policers for bandwidth
limitations.
S YNTAX
show policy-map [policy-map-name [class class-map-name]]
policy-map-name - Name of the policy map.
(Range: 1-16 characters)
class-map-name - Name of the class map. (Range: 1-16 characters)
D EFAULT S ETTING
Displays all policy maps and all classes.
C OMMAND M ODE
Privileged Exec
E XAMPLE
Console#show policy-map
Policy Map rd-policy