Microsens MS453490M Management Guide - Manual (Page 233)

C HAPTER 11 | Class of Service
Layer 3/4 Priority Settings
– 233 –
W EB I NTERFACE
To map CoS/CFI values to internal PHB/drop precedence:
1. Click Traffic, Priority, CoS to DSCP.
2. Select Add from the Action list.
3. Set the PHB and drop precedence for any of the CoS/CFI combinations.
4.
Click Apply.
Figure 118: Configuring CoS to DSCP Internal Mapping
Table 16: Default Mapping of CoS/CFI to Internal PHB/Drop Precedence
CFI
CoS
0 1
0 (0,0) (0,0)
1 (1,0) (1,0)
2 (2,0) (2,0)
3 (3,0) (3,0)
4 (4,0) (4,0)
5 (5,0) (5,0)
6 (6,0) (6,0)
7 (7,0) (7,0)