Figure 169: add a rule to a time range – Microsens MS453490M Management Guide User Manual
Page 300
Advertising
C
HAPTER
14
| Security Measures
Access Control Lists
– 300 –
6.
Fill in the required parameters for the selected mode.
7.
Click Apply.
Figure 169: Add a Rule to a Time Range
To show the rules configured for a time range:
1.
Click Security, ACL.
2.
Select Configure Time Range from the Step list.
3.
Select Show Rule from the Action list.
Figure 170: Showing the Rules Configured for a Time Range
Advertising