Figure 165: copying the ssh user’s public key – Microsens MS453490M Management Guide User Manual
Page 296
C
HAPTER
14
| Security Measures
Configuring the Secure Shell
– 296 –
The SSH server uses RSA or DSA for key exchange when the client first
establishes a connection with the switch, and then negotiates with the
client to select either DES (56-bit) or 3DES (168-bit) for data
encryption.
The switch uses only RSA Version 1 for SSHv1.5 clients and DSA
Version 2 for SSHv2 clients.
◆
TFTP Server IP Address – The IP address of the TFTP server that
contains the public key file you wish to import.
◆
Source File Name – The public key file to upload.
W
EB
I
NTERFACE
To copy the SSH user’s public key:
1.
Click Security, SSH.
2.
Select Configure User Key from the Step list.
3.
Select Copy from the Action list.
4.
Select the user name and the public-key type from the respective drop-
down boxes, input the TFTP server IP address and the public key source
file name.
5.
Click Apply.
Figure 165: Copying the SSH User’s Public Key