Microsens MS453490M Management Guide - Manual (Page 544)

C HAPTER 21 | System Management Commands
Time
– 544 –
calendar set This command sets the system clock. It may be used if there is no time
server on your network, or if you have not configured the switch to receive
signals from a time server.
S YNTAX
calendar set hour min sec {day month year | month day year}
hour - Hour in 24-hour format. (Range: 0 - 23)
min - Minute. (Range: 0 - 59)
sec - Second. (Range: 0 - 59)
day - Day of month. (Range: 1 - 31)
month - january | february | march | april | may | june | july |
august | september | october | november | december
year - Year (4-digit). (Range: 2001 - 2100)
D EFAULT S ETTING
None
C OMMAND M ODE
Privileged Exec
C OMMAND U SAGE
Note that when SNTP is enabled, the system clock cannot be manually
configured.
E XAMPLE
This example shows how to set the system clock to 15:12:34, February
1st, 2002.
Console#calendar set 15:12:34 1 February 2002
Console#
show calendar This command displays the system clock.
D EFAULT S ETTING
None
C OMMAND M ODE
Normal Exec, Privileged Exec
E XAMPLE
Console#show calendar
15:12:34 February 1 2002
Console#