Displaying hardware/software versions, Figure 3: system information – Microsens MS453490M Management Guide User Manual
Page 90
C
HAPTER
4
| Basic Management Tasks
Displaying Hardware/Software Versions
– 90 –
P
ARAMETERS
These parameters are displayed:
◆
System Description – Brief description of device type.
◆
System Object ID – MIB II object ID for switch’s network
management subsystem.
◆
System Up Time – Length of time the management agent has been
up.
◆
System Name – Name assigned to the switch system.
◆
System Location – Specifies the system location.
◆
System Contact – Administrator responsible for the system.
W
EB
I
NTERFACE
To configure general system information:
1.
Click System, General.
2.
Specify the system name, location, and contact information for the
system administrator.
3.
Click Apply.
Figure 3: System Information
D
ISPLAYING
H
ARDWARE
/S
OFTWARE
V
ERSIONS
Use the System > Switch page to display hardware/firmware version
numbers for the main board and management software, as well as the
power status of the system.
CLI R
EFERENCES
◆