Microsens MS453490M Management Guide - Manual (Page 602)

C HAPTER 24 | Authentication Commands
AAA
– 602 –
E XAMPLE
Console(config)#line console
Console(config-line)#accounting exec tps
Console(config-line)#exit
Console(config)#line vty
Console(config-line)#accounting exec default
Console(config-line)#
authorization exec This command applies an authorization method to local console or Telnet
connections. Use the no form to disable authorization on the line.
S YNTAX
authorization exec {default | list-name}
no authorization exec
default - Specifies the default method list created with the
aaa
authorization exec command.
list-name - Specifies a method list created with the aaa
authorization exec command.
D EFAULT S ETTING
None
C OMMAND M ODE
Line Configuration
E XAMPLE
Console(config)#line console
Console(config-line)#authorization exec tps
Console(config-line)#exit
Console(config)#line vty
Console(config-line)#authorization exec default
Console(config-line)#
show accounting This command displays the current accounting settings per function and
per port.
S YNTAX
show accounting [commands [level]] |
[[dot1x [statistics [username user-name | interface interface]]
| exec [statistics] | statistics]
commands - Displays command accounting information.
level - Displays command accounting information for a specifiable
command level.
dot1x - Displays dot1x accounting information.
exec - Displays Exec accounting records.