Microsens MS453490M Management Guide - Manual (Page 601)

C HAPTER 24 | Authentication Commands
AAA
– 601 –
E XAMPLE
Console(config)#aaa group server radius tps
Console(config-sg-radius)#server 10.2.68.120
Console(config-sg-radius)#
accounting dot1x This command applies an accounting method for 802.1X service requests
on an interface. Use the no form to disable accounting on the interface.
S YNTAX
accounting dot1x {default | list-name}
no accounting dot1x
default - Specifies the default method list created with the aaa
accounting dot1x command.
list-name - Specifies a method list created with the aaa accounting
dot1x command.
D EFAULT S ETTING
None
C OMMAND M ODE
Interface Configuration
E XAMPLE
Console(config)#interface ethernet 1/2
Console(config-if)#accounting dot1x tps
Console(config-if)#
accounting exec This command applies an accounting method to local console or Telnet
connections. Use the no form to disable accounting on the line.
S YNTAX
accounting exec {default | list-name}
no accounting exec
default - Specifies the default method list created with the aaa
accounting exec command.
list-name - Specifies a method list created with the aaa accounting
exec command.
D EFAULT S ETTING
None
C OMMAND M ODE
Line Configuration