Microsens MS453490M Management Guide - Manual (Page 829)

C HAPTER 35 | Class of Service Commands
Priority Commands (Layer 3 and 4)
– 829 –
show qos map trust-
mode
This command shows the QoS mapping mode.
S YNTAX
show qos map trust-mode interface interface
interface
ethernet unit/port
unit - Unit identifier. (Range: 1)
port - Port number. (Range: 1-10)
port-channel channel-id (Range: 1-5)
C OMMAND M ODE
Privileged Exec
E XAMPLE
The following shows that the trust mode is set to CoS:
Console#show qos map trust-mode interface ethernet 1/5
Information of Eth 1/5
COS Map mode: cos mode
Console#