Microsens MS453490M Management Guide - Manual (Page 702)

C HAPTER 27 | Interface Commands
– 702 –
manually specify the link attributes with the speed-duplex and
flowcontrol commands.
E XAMPLE
The following example configures Ethernet port 5 capabilities to include
100half and 100full.
Console(config)#interface ethernet 1/5
Console(config-if)#capabilities 100half
Console(config-if)#capabilities 100full
Console(config-if)#capabilities flowcontrol
Console(config-if)#
R ELATED C OMMANDS
negotiation (704)
speed-duplex (706)
flowcontrol (703)
description This command adds a description to an interface. Use the no form to
remove the description.
S YNTAX
description string
no description
string - Comment or a description to help you remember what is
attached to this interface. (Range: 1-64 characters)
D EFAULT S ETTING
None
C OMMAND M ODE
Interface Configuration (Ethernet, Port Channel)
C OMMAND U SAGE
The description is displayed by the show interfaces status command and in
the running-configuration file. An example of the value which a network
manager might store in this object is the name of the manufacturer, and
the product name.
E XAMPLE
The following example adds a description to port 4.
Console(config)#interface ethernet 1/4
Console(config-if)#description RD-SW#3
Console(config-if)#