Sierra Video TyLinx Pro - Manual (Page 114)

TyLinx Pro Help 114
© 2012 Sierra Video Systems
Panel Properties
Select the panel properties tab.
Numeric I/O sorting- Panel lists will display sorted by input or output number. Un-checked
panel will display lists by alpha sort.
Show UnMapped Levels- Levels that are unmapped will be displayed in status. Unchecked
will hide unmapped levels.
Enable Preset Level Flash- When checked this will cause level display to flash when preset
to switch. * If level button is programmed as a shift function, checking this box has no effect
on level button function.
Source Select Preset and Take Property- If this box is checked, router will “Take” when
source is selected. Un-checked will require a “Take” button to be pressed to initiate switch.
Level Hold Down Mode- When level buttons are held down for 3 seconds they will cycle
through a series of enabled and disabled. In the 2-Way Cycle mode, holding down the level
button toggles between all on to only the selected on. 3-Way Cycle Mode, holding down the
level button toggles between selected on, all on, and selected off others on.
Special Push Enable- When the box is checked the action of this row of buttons becomes
the first push command with the “First Push” row of buttons becoming the subsequent
commands until “Take”, “Select”, or “Clear” is pushed.
When programming is complete, click on “Send To Panel” to apply programming to the panel.