Sierra Video TyLinx Pro - Manual (Page 129)

Admin Utilities 129
© 2012 Sierra Video Systems
Panel Properties
Select the panel properties tab.
Numeric I/O sorting- Panel lists will display sorted by input or output number. Un-checked
panel will display lists by alpha sort.
Show UnMapped Levels- Levels that are unmapped will be displayed in status. Unchecked
will hide unmapped levels.
Enable Preset Level Flash- When checked this will cause level display to flash when preset
to switch. * If level button is programmed as a shift function, checking this box has no effect
on level button function.
Source Select Preset and Take Property- If this box is checked, router will “Take” when
source is selected. Un-checked will require a “Take” button to be pressed to initiate switch.
Level Hold Down Mode- When level buttons are held down for 3 seconds they will cycle
through a series of enabled and disabled. In the 2-Way Cycle mode, holding down the level
button toggles between all on to only the selected on. 3-Way Cycle Mode, holding down the
level button toggles between selected on, all on, and selected off others on.