Sierra Video TyLinx Pro User Manual
Page 90
Advertising
TyLinx Pro Help
90
© 2012 Sierra Video Systems
If the panel is to be a “Single Bus” (only controls 1 output), place a check in the “Single Bus”
box.
Placing a check in the “Single Bus” box will cause the panel to only access and switch the
single selected output.
If there is no check in the box and only one output is selected for the panel to control, the
panel can status the blocked outputs but only switch the selected output.
When selection of allowed outputs and levels is complete, click on “Send to Router”.
Advertising