Sierra Video TyLinx Pro - Manual (Page 200)

TyLinx Pro Help 200
© 2012 Sierra Video Systems
Actions
The Actions group contains several control buttons used by the operator for various control activities.
The functions of these buttons are explained in detail in the various subsections of this topic.
Destinations
The Destinations group shows a collection of content destinations (outputs) to where source content
may be routed. These controls are used for showing status as well as content destination selection
for takes . Destination controls may also be used to perform destination lock operations .
Event Log
At the bottom of the Console Player window an event log can be displayed. The default setting is
"Hide Event Log". To view the event log, click on "View Hide Event Log" to remove the check. The log
is used to provide user confirmation of actions and to indicate when user actions fail. Successful
actions are shown in green, warnings are shown in yellow, and unsuccessful actions are shown in
red. This log is volatile meaning that it is not saved anywhere and its contents are lost when the user
closes the Player. The user may clear the log by clicking the Clear Log button in the upper right-hand
corner of the log. Also, the log may be turned off and on by alternately clicking the menu item View,
Hide Event Log.
6.2.1 Status
The status of the switching router may be viewed at any time by the operation simply by hovering your
mouse pointer over a source or destination control in the Sources or Destinations control groups. To
show the connection status of a particular source just move the mouse pointer over the source control
as illustrated below: