Sierra Video TyLinx Pro - Manual (Page 80)

TyLinx Pro Help 80
© 2012 Sierra Video Systems
buttons on a panel. This does not necessarily mean you have out of date software.
If the version of software in your panel does not allow current button programming to be read the
display will reflect the factory default settings of a panel and the following message will display on the
upper right of the window.
Programming Buttons
There are 3 button modes for the panels;
Normal- The normal mode is the action that takes place when a button is pressed.
Shift- The shift mode is the action that takes place when a "Shift" button is programmed and held
down. This is similar to a PC keyboard operation.
Special Push- The special push mode only applies the the SCP-112 panel. When “Special Push” is
enabled the action of the button becomes the first push command with the “Normal” row of buttons
becoming the subsequent commands until “Take”, “Select”, or “Clear” is pushed. "Special Push" is