Sierra Video TyLinx Pro - Manual (Page 179)

Admin Utilities 179
© 2012 Sierra Video Systems
To recall saved settings, click on “Paste Settings” and select the settings you want to
apply and click on “Submit”.
Operational Notes
Enter the destination first. After the destination is entered, the button programmed “Select” or
“Select/Shift” will light indicating a valid entry. You can press either “Select” or “Take” to move
the cursor to the “Source” field, and enter the Source. After the “Source” is entered, pressing
“Take” will complete the route.
Names are stored in the router’s CPU. Enter names in the router before programming the
panel.
See the “names” section of the TyLinx Pro help file for details.
When a panel displays a question mark it is an indication that the name entered is not
recognized as a name in the router’s CPU.
The control panel downloads names from the router on power up. If the names in the router
are changed, remove power from the control panel for 10 seconds. Re-applying power will