Sierra Video TyLinx Pro - Manual (Page 35)

Admin Utilities 35
© 2012 Sierra Video Systems
Once the information has been retrieved, the Administrator will be presented with a dialog that will
permit them to create 2 default control consoles. The image below shows the Router Configuration
dialog:
Notice on the dialog shown above, that 2 default control consoles may be created and named. Enter a
meaningful name for both control consoles as they will be used later to identify consoles during
operations. When complete, click the OK button and Device Utilities will create the default control
consoles. Uncheck either Create Default Panel Console and/or Create Default Gird Console if one or
more default console are not to be created.
4.5 Router Setup
Router Setup
The following sections apply to setting up the router's names and operational options.
Access to these features are available by selecting "Setup" from the menu bar on the Device Setup
tab or double clicking on the router icon in the Device Map tab.