Sierra Video TyLinx Pro - Manual (Page 56)

TyLinx Pro Help 56
© 2012 Sierra Video Systems
Changes are sent to the router upon selection.
4.5.8 Output Slew
Output Slew
Overview
Some models of Sierra Video Digital routers offer adjustable output slew rate. This
function allows users to adjust the slew rate of each output to cope with the varying
formats that the router accepts.
In the 'HD' mode: The router complies with the <= 270psec rise and fall time
spec defined in the SMPTE 292M standard
In the 'SD' mode: The router complies with the >= 400psec and <=1500psec rise and
fall time spec defined in the SMPTE 259M standard.
'HD' is the factory default setting.
Note that if the Slew Rate is set to HD, the routing switcher will pass HD and SD
signals correctly. However a HD signal will not be passed through the routing
switcher if the Slew Rate is set to “SD”.
Output Slew Rate Setup
For units with an "Output Slew Rate" option, select the "Output Slew" tab from the Setup window.