Network requirements – H3C Technologies H3C S12500 Series Switches User Manual

Page 429

Advertising
background image

413

Protocol: pim-sm, Flag: WC

UpTime: 00:16:56

Upstream interface: Register

Upstream neighbor: 4002::1

RPF prime neighbor: 4002::1

Downstream interface(s) information:

Total number of downstreams: 1

1: Vlan-interface102

Protocol: pim-sm, UpTime: 00:16:56, Expires: 00:02:34

IPv6 PIM-SM admin-scoped zone configuration example

Network requirements

Receivers receive VOD information through multicast. The entire IPv6 PIM-SM domain is divided into IPv6

admin-scoped zone 1, IPv6 admin-scoped zone 2, and the IPv6 global zone. Switch B, Switch C, and

Switch D are ZBRs of these three zones, respectively.
Source 1 and Source 2 send different multicast information to FF14::101. Host A receives the multicast

information from only Source 1, and Host B receives the multicast information from only Source 2. Source
3 sends multicast information to multicast group FF1E::202. Host C is a multicast receiver for this

multicast group.
VLAN-interface 101 of Switch B acts as a C-BSR and a C-RP of admin-scoped zone 1 and provides

services for the IPv6 multicast groups with the Scope field value in their group addresses being 4.
VLAN-interface 104 of Switch D acts as a C-BSR and a C-RP of admin-scoped zone 2 and provides

services for the IPv6 multicast groups with the Scope field value in their group addresses being 4.

VLAN-interface 109 of Switch F acts as C-BSRs and C-RPs of the global-scoped zone and provides

services for IPv6 multicast groups with the Scope field value in their group addresses being 14.
MLDv1 runs between Switch A, Switch E, Switch I, and their respective receivers.

Advertising