H3C Technologies H3C S12500 Series Switches - Manual (Page 151)

135
Step Command Remarks
4. Configure the BS timeout
timer.
c-bsr holdtime interval
Optional.
By default, the BS timeout timer is
determined by this formula: BS
timeout timer = BS period × 2 +
10. The default BS period is 60
seconds, so the default BS timeout
timer = 60 × 2 + 10 = 130
(seconds).
Disabling BSM semantic fragmentation
Generally, a BSR periodically distributes the RP-set information in bootstrap messages within the PIM-SM
domain. It encapsulates a BSM in an IP datagram and might split the datagram into fragments if the
message exceeds the maximum transmission unit (MTU). In respect of such IP fragmentation, loss of a
single IP fragment leads to unavailability of the entire message.
Semantic fragmentation of BSMs can solve this issue. When a BSM exceeds the MTU, it is split to multiple
bootstrap message fragments (BSMFs).
• After receiving a BSMF that contains the RP-set information of one group range, a non-BSR router
updates corresponding RP-set information directly.
• If the RP-set information of one group range is carried in multiple BSMFs, a non-BSR router updates
corresponding RP-set information after receiving all these BSMFs.
Because the RP-set information contained in each segment is different, loss of some IP fragments will not
result in dropping of the entire message.
Generally, a BSR performs BSM semantic fragmentation according to the MTU of its BSR interface.
However, the semantic fragmentation of BSMs originated due to learning of a new PIM neighbor is
performed according to the MTU of the outgoing interface.
The function of BSM semantic fragmentation is enabled by default. Devices not supporting this function
might deem a fragment as an entire message, thus learning only part of the RP-set information. Therefore,
if such devices exist in the PIM-SM domain, you need to disable the semantic fragmentation function on
the C-BSRs.
To disable BSM semantic fragmentation:
Step Command Remarks
1. Enter system view. system-view N/A
2. Enter public network PIM
view or VPN instance PIM
view.
pim [ vpn-instance
vpn-instance-name ]
N/A
3. Disable the BSM semantic
fragmentation function.
undo bsm-fragment enable
By default, the BSM semantic
fragmentation function is enabled.
Configuring administrative scoping
When administrative scoping is disabled, a PIM-SM domain has only one BSR. The BSR manages the
whole network. To manage your network more effectively and specifically, partition the PIM-SM domain
into multiple admin-scoped zones. Each admin-scoped zone maintains a BSR to provide services for a