Oki ColorPainter E-64s - Manual (Page 113)

5
 Placing the cut path objects above the rest of the image makes it possible to prevent the occurrence of
potential problems during cut path detection.
 It may not be possible to add cut path objects to the new layer depending on cut path location.
The cut paths are detected without problems when they do not come across artworks.
 By default, EPS files do not take artboard size into consideration, but the artwork location is taken into
consideration.
In Illustrator, the Save as window contains a Use Artboards checkbox.
This setting can be used when the file type is set to EPS.
Check this box if the artboard size needs to be taken into consideration.
When Stroke is used for cut path When the Fill is used for cut path
 Artboard size in PDF files is taken into consideration. Ideally, jobs should be saved in PDF version 1.6
or later.