Oki ColorPainter E-64s - Manual (Page 118)

10
Cutter mark settings:
1. Select Manage Cutters... from the File menu in RIP-Queue, and click Yes to stop the server.
2. Select the cutter you want to use, and click Configure... . (“Graphtec Cutter” is selected in this example.)
The options that can be used differ depending on the cutter and the cutter marks.
In this step,
printing of ONYX barcode can be disabled.
* Unchecking the box for the cutters you do not use disables the display of these cutters in the
Contour Cutter Selection drop-down menu in job properties or in Job Editor. This may be useful to
prevent the user from selecting the wrong cutter (cutter marks).