Contour cut using job editor – Oki ColorPainter E-64s User Manual
Page 119
Advertising
11
Contour cut using Job Editor
The same steps as in RIP-Queue can be performed manually in Job Editor.
1.
Click Open in RIP-Queue.
2.
Select a job, check the
Open in Job Editor
box, and click Open.
3.
Select a cutter in the Contour Cutter Selection drop-down menu in the Printer and Media tab.
(“Graphtec Cutter” is selected in this example.)
4.
Select Job Properties... in the File menu.
Advertising