Oki ColorPainter E-64s User Manual
Page 116
Advertising
8
8.
Check that the newly created quick set is selected before opening the job.
9.
After the job has been RIP processed, print it using the printer.
* Although the cut file for CUT-Server is created just after the printing has started, it is not always
required to launch CUT-Server during printing. (The cut file is automatically saved in the hot folder.)
When CUT-Server is launched just after the printing has started, the created cut file is displayed below
the cutter name.
Note: The following message is displayed if an image with no cut path is printed with contour cut selected.
Advertising