IAI America SCON-C - Manual (Page 210)

192
Appendix
 Pause input disable selection
Parameter No. 15 defines whether the pause input signal is disabled or enabled.
Setting
Enable (use) 0
Disable (do not use) 1
The factory setting is “0 [Enable].”
 Servo ON input disable selection
Parameter No. 21 defines whether the servo ON input signal is disabled or enabled.
Setting
Enable (use) 0
Disable (do not use) 1
The factory setting is “0 [Enable].”
 Home-return input disable selection
Parameter No. 40 defines whether the home-return input signal is disabled or enabled.
Setting
Enable (use) 0
Disable (do not use) 1
The factory setting is “0 [Enable].”
 Operating-mode input disable selection
Parameter No. 41 defines whether the operating-mode input signal is disabled or enabled.
Setting
Enable (use) 0
Disable (do not use) 1
The factory setting is “0 [Enable].”