Connecting the pio cable (i/o), 6 connecting the pio cable (i/o) – IAI America SCON-C User Manual
Page 47
29
3.6 Connecting the PIO Cable (I/O)
Connect the supplied flat cable. Connect the opposite end of the
cable (no connector) to an appropriate peripheral (host PLC, etc.).
I/O flat cable (supplied) Model: CB-PAC-PIO
*
indicates the cable length (L). A cable length of up to 30 m is supported.
Example: 080 = 8 m
Flat cable: KFX-20 (S) (color) (Kaneko Cord)
No connector
No connector
Flat cable (20 cores) x 2
Half-pitch MIL socket: HIF6-40D-1.27R
(Hirose)
Brown-1
Red-1
Orange-1
Yellow-1
Green-1
Blue-1
Purple-1
Gray-1
White-1
Black-1
Brown-2
Red-2
Orange-2
Yellow-2
Green-2
Blue-2
Purple-2
Gray-2
White-2
Black-2
Brown-3
Red-3
Orange-3
Yellow-3
Green-3
Blue-3
Purple-3
Gray-3
White-3
Black-3
Brown-4
Red-4
Orange-4
Yellow-4
Green-4
Blue-4
Purple-4
Gray-4
White-4
Black-4
Signal Color Wire
Signal Color Wire
Flat cable
[A]
(pressure-
welded)
Flat cable
[B]
(pressure-
welded)