Yokogawa ADMAG AXR - Manual (Page 21)

<3. INSTALLATION>
3-9
IM 01E30D01-01EN
Table 3.3.5 Wafer Type Tightening Torque Values for PVC Piping
Tightening torque values for PFA lining type Unit:
N-m
{kgf-cm}
[in-lbf]
Gasket types
within flowtube
Fluororubber gasket (optional codes GA, GC, and GD)
Gasket types
for user’s flange
Fluororubber gasket, chloroprene rubber gasket (optional codes BSC and BCC), or the equivalent in hardness
Flange ratings
Size
mm (inch)
JIS 10K
ANSI Class
150
DIN PN10 JIS20K
ANSI Class
300
DIN PN16 DIN PN40
JIS F12
(JIS 75M)
50 (2.0)
9.9 to 16.5
{101.0 to 168.3}
[87.6 to 146.0]
9.9 to 16.5
{101.0 to 168.3}
[87.6 to 146.0]
—
10.6 to 17.6
{108.1 to 179.5}
[93.8 to 155.8]
10.6 to 17.6
{108.1 to 179.5}
[93.8 to 155.8]
—
9.5 to 15.9
{96.9 to 162.1}
[84.1 to 140.7]
—
65 (2.5)
14.2 to 23.7
{144.8 to 241.7}
[125.7 to 209.8]
14.2 to 23.7
{144.8 to 241.7}
[125.7 to 209.8]
—
15.5 to 25.9
{158.1 to 264.1}
[137.2 to 229.2]
15.5 to 25.9
{158.1 to 264.1}
[137.2 to 229.2]
28.2 to 51.8
{287.6 to 528.2}
[249.6 to 458.4]
— —
80 (3.0)
8.0 to 13.3
{81.6 to 135.6}
[70.8 to 117.7]
17.4 to 26.7
{177.4 to 272.3}
[154.0 to 236.3]
—
9.7 to 16.1
{98.9 to 164.2}
[85.8 to 142.5]
9.7 to 16.1
{98.9 to 164.2}
[85.8 to 142.5]
9.7 to 16.1
{98.9 to 164.2}
[85.8 to 142.5]
—
15.4 to 25.6
{157.0 to 261.0}
[136.3 to 226.6]
100 (4.0)
11.3 to 18.8
{115.2 to 191.7}
[100.0 to 166.4]
11.3 to 18.8
{115.2 to 191.7}
[100.0 to 166.4]
—
14.2 to 23.6
{144.8 to 240.7}
[125.7 to 208.9]
14.2 to 23.6
{144.8 to 240.7}
[125.7 to 208.9]
14.2 to 23.6
{144.8 to 240.7}
[125.7 to 208.9]
—
21.1 to 35.1
{215.2 to 357.9}
[186.7 to 310.6]
150 (6.0)
22.5 to 37.6
{229.4 to 383.4}
[199.1 to 332.8]
22.5 to 37.6
{229.4 to 383.4}
[199.1 to 332.8]
—
27.2 to 45.3
{277.4 to 461.9}
[240.7 to 400.9]
27.2 to 45.3
{277.4 to 461.9}
[240.7 to 400.9]
40.7 to 62.1
{415.0 to 633.2}
[360.2 to 549.6]
—
21.8 to 36.3
{222.3 to 370.2}
[192.9 to 321.3]
200 (8.0)
22.1 to 36.9
{225.4 to 376.3}
[195.6 to 326.6]
31.9 to 55.3
{325.3 to 563.9}
[282.3 to 489.4]
31.9 to 55.3
{325.3 to 563.9}
[282.3 to 489.4]
27.3 to 45.3
{278.4 to 461.9}
[241.6 to 400.9]
27.3 to 45.3
{278.4 to 461.9}
[241.6 to 400.9]
27.3 to 45.3
{278.4 to 461.9}
[241.6 to 400.9]
—
23.8 to 39.6
{242.7 to 403.8}
[210.6 to 350.5]
Table 3.3.6 Wafer Type Tightening Torque Values for Metal Piping and Permeable Fluids
Tightening torque values for PFA lining type Unit:
N-m
{kgf-cm}
[in-lbf]
Gasket types
within flowtube
No gasket (standard)
Gasket types
for user’s flange
PTFE-sheathed non-asbestos gasket (optional codes BCF and BSF), or the equivalent in hardness
Flange ratings
Size
mm (inch)
JIS 10K
ANSI Class
150
DIN PN10 JIS20K
ANSI Class
300
DIN PN16 DIN PN40
JIS F12
(JIS 75M)
50 (2.0)
66.2 to 76.1
{675.1 to 776.0}
[585.9 to 673.5]
66.2 to 76.1
{675.1 to 776.0}
[585.9 to 673.5]
—
33.1 to 38.0
{337.5 to 387.5}
[292.9 to 336.3]
33.1 to 38.0
{337.5 to 387.5}
[292.9 to 336.3]
—
71.2 to 118.6
{726.0 to 1209}
[630.1 to 1050]
—
65 (2.5)
89.5 to 102.9
{912.6 to 1049}
[792.1 to 910.7]
89.5 to 102.9
{912.6 to 1049}
[792.1 to 910.7]
—
44.9 to 51.6
{457.9 to 526.2}
[397.4 to 456.7]
44.9 to 51.6
{457.9 to 526.2}
[397.4 to 456.7]
81.8 to 103.2
{834.1 to 1052}
{724.0 to 913.4]
— —
80 (3.0)
51.3 to 59.0
{523.1 to 601.6}
[454.0 to 522.2]
111.3 to 118.4
{1135 to 1207}
[985.0 to 1048]
—
58.1 to 66.8
{592.5 to 681.2}
[514.2 to 591.2]
58.1 to 66.8
{592.5 to 681.2}
[514.2 to 591.2]
58.1 to 66.8
{592.5 to 681.2}
{514.2 to 591.2]
—
100.8 to 115.9
{1028 to 1182}
[892.1 to 1026]
100 (4.0)
66.7 to 76.7
{680.2 to 782.1}
[590.3 to 678.8]
66.7 to 76.7
{680.2 to 782.1}
[590.3 to 678.8]
—
76.1 to 87.5
{776.0 to 892.3}
[673.5 to 774.4]
76.1 to 87.5
{776.0 to 892.3}
[673.5 to 774.4]
76.1 to 87.5
{776.0 to 892.3}
{673.5 to 774.4]
—
129.8 to 149.3
{1324 to 1522}
[1149 to 1321]
150 (6.0)
122.0 to 140.5
{1246 to 1433}
[1082 to 1243]
122.0 to 140.5
{1246 to 1433}
[1082 to 1243]
—
86.8 to 99.8
{885.1 to 1018}
[768.2 to 883.3]
86.8 to 99.8
{885.1 to 1018}
[768.2 to 883.3]
129.8 to 136.9
{1324 to 1396}
[1149 to 1212]
—
125.6 to 144.4
{1281 to 1472}
[1112 to 1278]
200 (8.0)
111.6 to 128.3
{1138 to 1308}
[987.7 to 1136]
161.0 to 192.3
{1642 to 1961}
[1425 to 1702]
161.0 to 192.3
{1642 to 1961}
[1425 to 1702]
122.0 to 140.3
{1244 to 1431}
[1080 to 1242]
122.0 to 140.3
{1244 to 1431}
[1080 to 1242]
122.0 to 140.3
{1244 to 1431}
[1080 to 1242]
—
128.0 to 147.2
{1305 to 1501}
[1133 to 1303]
Table 3.3.7 Centering Device Identification (AXR Lay length code 1, PFA lining)
Flange
ratings
Size
mm (inch)
JIS ANSI DIN
10K 20K
F12
(75M)
150 300 PN10 PN16 PN40
80 (3.0) B F H F C — G —
100 (4.0) B F H C H — F —
150 (6.0) C D D C E — C —
200 (8.0) C D D D E C C —
*: Each centering device is engraved with a character as identification.