Yokogawa ADMAG AXR - Manual (Page 96)

<7. OPERATION VIA BRAIN TERMINAL (BT200)>
7-2
IM 01E30D01-01EN
Use the function key [F2] CAPS to select between
uppercase and lowercase (for letters only). The
case toggles between uppercase and lowercase
each time you press [F2] CAPS.
F0705.ai
CODE CAPS CLR ESC
Entering uppercase
CODE caps CLR ESC
Entering lowercase
Entry Key-in sequence
Boy
( B ) ( y ) ( o )
to lower case
Use the function key [F1] CODE to enter symbols.
The following symbols will appear in sequence, one
at a time, at the cursor each time you press [F1]
CODE:
/ . – , + * ) ( ’ & % $ # ” !
To enter characters next to these symbols, press [ > ]
to move the cursor.
Entry Key-in sequence
I/m
( / ) ( m ) ( I )
symbol command
(2) Function Keys
The functions of the function keys depend on the
function commands on display.
Function commands
Function keys
F0706.ai
MENU
A:DISPLAY
B:EASY SETUP
C:BASIC SETUP
D:TOTAL SET
E:PULSE SET
F:STATUS FUNC
HOME SET ADJ ESC
Function Command List
Command Function
ADJ Displays the ADJ menu
CAPS/caps Selects uppercase or lowercase
CODE Selects symbols
CLR Erases input data or deletes all data
DATA Updates parameter data
DEL Deletes one character
DIAG Calls the self-check panel
ESC Returns to the most recent display
HOME Displays the menu panel
NO Quits setup and returns to the previous display
OK Proceeds to the next panel
PARM Enters the parameter number setup mode
SET Displays the SET menu
SLOT Returns to the slot selection panel
UTIL Calls the utility panel
*COPY Prints out parameters on display
*FEED Paper feed
*LIST Lists all parameters in the menu
*PON/POFF Automatic printout mode on or off
*PRNT Changes to the print mode
*GO Starts printing
*STOP Cancels printing
* Available on BT200-P00 (with printer).