Fine-tuning gamma, P105 – Canon XEED WUX450 User Manual

Page 105

Advertising
background image

105

Adjusting Image Quality (Image Adjustment)

Oper

ation

Setti

ng Fu

nctio

n

s fr
om Me

nus

• [Off] is the factory default.
• The adjustments you have made are stored

as adjusted values for the input signals and
image mode of the current projection.

• Adjustment is not shown on the projected

menu screen itself.

Fine-Tuning Gamma

> [Image adjustment] > [Advanced

adjustment] >

[Fine-Tune Gamma]

The four gamma curves (white, red,
green, blue) can be adjusted.

Red,

green, and blue can be adjusted
separately. Adjustments to white are
also applied to the three other colors.
Note that adjusting any color will
overwrite previous adjustments.

Select [Fine-Tune Gamma] then press
the OK button. The following [Fine-
Tune Gamma] screen for confirmation
appears.

Use the [ ] / [ ] buttons to select the
color, then press the OK button. Next,
use the [ ] / [ ] buttons to select a
point on the gamma curve, and use the
[ ] / [ ] buttons to adjust the position of
the point. When you have completed
the adjustment, press the OK button to
accept your setting and then press the
MENU button or EXIT button.

HDMI

Component

LAN

Digital PC

Analog PC

USB

Advertising