Resetting the lamp counter, About the display of the lamp counter – Canon XEED WUX450 User Manual

Page 119

Advertising
background image

119

Customizing System Operation (System Settings)

Oper

ation

Setti

ng Fu

nctio

n

s fr
om Me

nus

Resetting the Lamp

Counter

> [System settings] > [Other settings] >

[Lamp counter]

You can reset the lamp counter that
indicates the time for lamp
replacement.

Select [Lamp counter] and press the
OK button to display the lamp counter.

Select [Reset] and press the OK button.

Select [Yes] on the screen for
confirmation and press the OK button
to reset the lamp counter.
Press the MENU button or EXIT button.

About the Display of the

Lamp Counter

The lamp counter display is as follows.

Less than 2,700 hours
Displayed as a green bar.

2,700 hours to less than 3,000 hours
Displayed as a green and yellow bar.

When the lamp hours are 2,700 hours
to less than 3,000 hours, the message
“Obtain a new lamp.” appears when
power is turned on.

Over 3,000 hours
Displayed as a green, yellow and red
bar.

The message “Replace with the new
lamp.” appears when power is turned
on.

HDMI

Component

LAN

Digital PC

Analog PC

USB

Do not reset the lamp counter
except when you have replaced
the lamp. Otherwise, the lamp
counter cannot indicate the
correct timing for replacing the
lamp.
For details of lamp replacement,
refer to

page 201

.

Advertising