Advanced instructions: smoother overlapping areas, Installation-related menu settings – Canon XEED WUX450 User Manual
Installation-Related Menu Settings
■ Advanced Instructions: Smoother Overlapping Areas
Adjustments to areas A, B, and C may make the black level along the right edge of
area D (that is, the edge bordering the blending area) more noticeable than that of
To compensate, adjust each area as follows.
When there are multiple blending areas relative to the projected image (on all
edges), you must adjust the width of areas A, B, and C.
In this example, instructions are given for adjusting area B.
In the window of step 2 in “Advanced Instructions: Black Level
), select [Adjustment type] > [Area] > [Side] > [Right].
Adjust the black level of non-overlapping image areas.
On the image for adjustment, select the
edge to adjust (left/right/top/bottom).
Adjusts the width of area A
Adjusts the width of area B
C-Width Adjusts the width of area C
Area A: Black level cannot be adjusted.
Area B: Adjust to a black level different from that of area
Area C: Adjust to provide a smooth transition relative to
the black levels of areas B and D.
Position of end marker (hidden)
Areas C–A (default: 0)