Canon XEED WUX450 User Manual
Using the Projector in Direct Mode
The projector selection menu is displayed. Click the projector to connect
The Direct Mode window is displayed again. Click [Start projecting].
The computer screen is now projected.
For details on the projector selection menu, refer to “Using the Projector Selection Menu”
• If the [NMPJ Password] setting has been configured on the projector’s settings screen
), the password is now requested. Enter the password.
• To stop projection, click [Stop projecting].
• A BUSY icon (
) indicates that the projector is not available, whether it is off, in use
by other computers, or unavailable for other reasons. The BUSY icon (
) is not
updated automatically. To view updated projector status, select or search for projectors