Using menus, Menu configuration, Menu button – Canon XEED WUX450 User Manual

Page 84

Advertising
background image

84

Using Menus

Use the menus to set the operation of the projector in detail.

Menu Configuration

The menu screen is divided into 6 tabs as shown below.

Menu items

[System settings] tab

You can set the operation of the
projector.

[Network settings] tab

These settings are for when using
the projector from a PC via a
network.
For the network settings, refer to
“Connecting to a Network” (

P167

).

[Information] tab

You can check information
about the signal types of the
images projected and other
information.

Contents of menu

[Input settings] tab

You can set the type of signal
or the method of projection of
the images input.

[Image adjustment] tab

You can adjust the image quality
and colors according to your
preference.

[Install settings] tab

This setting is used when installing
the projector.

Input Signal Types for which a Menu Item is Displayed

Different menu items are displayed for different input signal types.
In the following explanation of each menu item, the input signal type for which
the menu item is displayed is indicated as follows:

HDMI

Component

LAN

Digital PC

Analog PC

USB

Input signal for which the
menu item is displayed
Input signal for which the
menu item is not displayed

Advertising