Lens shift function, Amount of lens shift, P134 – Canon XEED WUX450 User Manual

Page 134: R to “lens shift function, Fer to “lens shift function, Installation procedure

Advertising
background image

Installation Procedure

134

Lens Shift Function

You can reposition the image in all directions by turning the lens shift dials on the
side of the projector, which moves the lens up, down, left, or right. For instructions,
refer to “Lens Shift Control” (

P45

).

Amount of Lens Shift

The amount of lens shift is indicated as a percentage relative to the image height
and width.
The lens shift ranges for each model of projector are as follows.

The projector supports vertical and horizontal lens shift. Performance using lens
shift is ensured within the recommended range described below. Using lens shift
outside of this range may cause problems such as peripheral dimness or lower
resolution. In this case, adjust lens shift to within the recommended range.

WUX450

WX520

WUX400ST

WX450ST

A (Amount of shift up)

+60%

+62%

+75%

+77%

B (Amount of
horizontal shift)

±10%

±10%

±10%

±10%

A

Projection range without
using lens shift

Recommended lens shift range

B

B

Lens shift range

13%

10%

A

Advertising